Qty 1 - AZR-15A1 ARIZONA REGULATOR 3 Position FRT Trigger System / Complete ARIZONA REGULATOR System AZR unit AZR FCG and Std Mil-Spec 3 Position Selector ***See green background pic for complete system you will receive***
*** AMBI 3 POSITION MODEL LOCATED HERE Optional AMBI 3 position FRT selector is an American Made OEM Mil-Spec 3 position Ambi selector that J.D. has sourced to make available as an add on - see brown box pic for add on AMBI selector example - when choosing this option you will receive Qty 1 complete AZR-15A1 system AND Qty 1 AMBI Mil-Spec 3 position frt selector ***
The Industry Standard in Function and Reliability
100% Drop In System using provided Std Mil-Spec Hammer and Trigger Pins
Use the Provided 3 Position Mil-Spec Selector or any other Mil-Spec 3 Position Selector you want. Or add on one of our AMBI 3 position FRT selectors to your AZR-15A1 order.
Works in standard Mil-Spec AR platforms - Lowers with high shelf, low shelf, no shelf, narrow pocket, wide pocket. - Uppers with oval pocket on underside - NO COLT BLOCK IN LOWER
No modification of trigger, upper receiver, lower receiver, FCG, or BCG required
Perfect timing engineered into the ARIZONA REGULATOR. Timing never needs adjusted
Originally developed for 5.56 and 9mm Mil-Spec Ammo
Will work with other calibers that run a Mil-Spec type full auto BCG configuration
Easily swap back and forth from one gun to another containing compatible parts
Does not change the factory exterior appearance of your gun
Does not change the factory function of your gun when removed
Requires FA BCG and H3 buffer 5+ oz for 5.56/.223 or heavy 10+ oz buffer for 9mm. Weights must rattle inside buffer to replicate the OG Colt Mil-Spec
*** Some have great results using H2 with 5.56 or 8oz and a spacer with 9mm. If you have issues with what you decided to go with then use the OG Colt Equivalent and you will not have issues.
We run a bone stock factory built DD M4V7 down at the service center all we did was remove the fcg and selector and installed an AZR-15A1 System. We kept the DD factory H2 buffer in the DD M4V7 and it works perfectly.
Factory Built DD MK18 Pistol and DD M4V7 Carbine are the benchmark used at AZR for Std Mil-Spec AR Rifles and Pistols as they are manufactured within the OG Colt Mil-Spec Parameters Required.
SCROLL DOWN FOR FUNCTION VIDEO
THESE SHIP GRUNT PACK IN CARDBOARD BOX W/ PARTS WRAPPED IN WAX PAPER JUST LIKE THE GOOD OL DAYS
( selector will vary from pic we are using current American Made SEMI-AUTO OEM AR-15 Hammers and Triggers w/308 rated hammer spring to manufacture our SEMI-AUTO FCG and current American Made OEM 3 Position Selectors which are compatible with the SEMI-AUTO System(s) we designed and engineered therefore making all parts we supply with our System(s) also SEMI-AUTO parts in accordance with J.D.s design and intent for AZR System(s) )
We manufacture all of our ARIZONA REGULATOR AZR Units in house on our machines from Bar Stock as we always have done.
See AZR-15A1 in TM Manual for more tech info: https://arizonaregulator.com/azr-tech-manual/ .
All orders ship for 8 bucks via U.S.P.S. Priority Mail Flat Rate Box
Federal Legal Nationwide.
State Legal in 35 States.
States we cannot sell or ship to due to State Restrictions.
CA, CO, CT, DC, DE, FL, HI, IA, IL, MD, MN, NJ, OR, RI, WA.
We do not accept mail in payments from Restricted areas. Regardless if they use ship to addresses outside of those Restricted areas.
By placing this order you confirm you are allowed to purchase this item from your current location and posses this item at the ship to location address. Your purchase is being made in the State of Arizona. The ARIZONA REGULATOR is not intended for possession in restricted areas.
Lab 288 / Mat 0
All orders final once shipped. No Refunds. No Returns. See Terms page for Warranty and other info.
